PRODUCT INFORMATION

The electronic card inside the actuator operates between 12-32 VDC and provides current protection for the motor. When the starting and end-of-stroke positions are pressed on the limit switches, which are normally open (NO), it is detected and grounded.

The electronic card power requirement is a maximum of 4 Watt (15V x 265 mA) to prevent damage to the driver units and has a DC-DC converter feature. Thanks to the programmable electronic card, the analog position information produces an output voltage between 0V – 3.3V (maximum) according to the position of the actuator.

When the actuator is closed, the output voltage is 0V, and when it is open, the output voltage is 3.3V (maximum). In addition, the lap information is counted and stored, and the position can be determined by reading the voltage corresponding to that lap.

According to ALA-120-45, MIL-STD-810G standard:
Operating Temperature Range, Storage Temperature Range,
Temperature Shock, Solar Radiation, Vibration and Mechanical Shock,
Humidity, Dust, Rain and Sealing, Salt Mist,
Pressure/Altitude,
it meets the requirements.

Please ask for detailed information about test methods and procedures

TECHNICAL DATA

• Working Voltage: 12–32VDC
• Working Current: ≤ 0.9A @No Load, ≤4.5A @2500N
• Motor: Brushed DC Motor
• Brake: Auto-blocking
• Position Sensor: Magnetic encoder and analog output voltage 0 – 3.3 V
• Connector Type: JD38999 / 24WA98PN – JD38999 / 24WA35PA
• Axial Load Capacity: 2000 N (nominal) and 2500 N (maximum)
• Stroke Distance: 45mm
• Speed: 3mm/sec linear movement under 28VDC
• Color: FED-STD-595B 37030 Black
• Weight: 1.5 kg
• Working Temperature: -40°C to +65°C
• Protection Class: IP68